Preaload Image

Dr. Noor Md. Sadiqul Hasan

Professor
PhD in Structural Engineering (UoA, Australia)
MSc in Structural Engineering (UEL, UK)
BSc in Civil Engineering (KUET, BD)
Room #   Ext #
Email: nmshasan@iubat.edu

Dr. Noor Md. Sadiqul Hasan is a Professor in the Department of Civil Engineering at the International University of Business Agriculture &Technology (IUBAT), Dhaka, Bangladesh. Dr. Hasan has an extensive academic, teaching and research experiences in several countries among the world including Australia, Malaysia, UK and so on. Furthermore, Dr. Hasan has earned a PhD in Structural Engineering from The University of Adelaide (UoA), Australia. Dr. Hasan also completed his Masters in Structural Engineering from University of East London (UEL), UK. Moreover, Dr. Hasan acquired his BSc in Civil Engineering from Khulna University of Engineering & Technology (KUET), Bangladesh.

Besides the broad educational qualification of Dr. Hasan, he has also numerous publications record in reputed international journals and conferences. In addition, Dr. Hasan has affiliation with Institution of Engineers Australia (IEAust), Institution of Civil Engineers (ICE), UK, Institution of Engineers Bangladesh (IEB), American Concrete Institute (ACI), USA and also with American Society of Civil Engineers (ASCE), USA.

PhD in Structural Engineering (UoA, Australia)
MSc in Structural Engineering (UEL, UK)
BSc in Civil Engineering (KUET, BD)

  • CEN 347 Analysis and Design of Reinforced Concrete- II
  • CEN 409 Structural Analysis and Design- II
  • CEN 410 Structural Analysis and Design- II Practice

Books/ Book Chapters: 

  • Noor M. S. Hasan, Habibur R. Sobuz, Costas Ioannou (2011). Non Sway and Sway Methods for Design of Multi-Storey RC Building. VDM Verlag Dr. Muller GmbH & Co. KG. ISBN: 978-3-639-33650-4.
  • Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Ehsan Ahmed (2011). Salinity Removal of Brick Clay by Using Different Techniques. VDM Verlag Dr. Muller GmbH & Co. KG. ISBN: 978-3-639-33708-2.

Refereed Journals:

  • Noor Md. Sadiqul Hasan, Phillip Visintin, Deric Oehlersand Terry Bennett (2019):Time-Dependent Deflection of RC Beams Allowing for Partial Interaction and Non-linear Shrinkage, Materials and Structures Vol. 52 Issue 3,DOI: 10.1617/s11527-019-1350-0 (Impact factor = 3.428)
  • Habibur Rahman Sobuz, Ehsan Ahmed, Norsuzailina Mohamad Sutan, Noor Md. Sadiqul Hasan, Md. Alhaz Uddin and Md. Jahir Uddin(2012):Bending and Time-dependent Responses of RC Beams Strengthened with Bonded Carbon Fiber Composite Laminates, Construction and Building Materials, Elsevier Ed.,Vol. 29, April 2012, pp. 597-611. (Impact factor = 6.141)
  • Noor Md. Sadiqul Hasan, Habibur Rahman Sobuz,Md. Shiblee Sayed and Md. Saiful Islam (2012): The Use of Coconut Fiber in the Production of Structural Lightweight Concrete, Journal of Applied Sciences, Vol.12, No.9, pp.831-839.
  • Noor Md. Sadiqul Hasan, Md. Shiblee Sayed,Habibur Rahman Sobuzand Costas Ioannou(2011): Effects of Non Sway and Sway Methods for Analysis and Design of RC Frames for Multi-Storied Building, International Journal of Physical Science, Vol. 6, No.17, pp. 4294–4301. (Impact Factor = 0.554)
  • Habibur Rahman Sobuz, Ehsan Ahmed, Noor Md. Sadiqul Hasan and Md. Alhaz Uddin (2011): Structural Strengthening of RC Beams Externally Bonded with Different CFRP Laminates Configurations, Journal of Civil Engineering, Institution of Engineers Bangladesh (IEB), Vol. 39, No.1, pp. 33-47.
  • Habibur Rahman Sobuz, Ehsan Ahmed, Noor Md. Sadiqul Hasan and Md. Alhaz Uddin (2011): Use of Carbon Fiber Laminates for Strengthening Reinforced Concrete Beams in Bending, International Journal of Civil and Structural Engineering, Vol. 2, No.1, pp. 67-84. 
  • Habibur Rahman Sobuz,Noor Md. Sadiqul Hasan,Nafisa Tamanna and Md. Saiful Islam (2014):Structural Light-weight Concrete Production by using Oil Palm Shell (OPS), Journal of Materials, Hindawi Publishing Corporation, Vol. 2014, Article ID 870247, 6 pages.
  • Md. Alhaz Uddin, Jameel Hossain, Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Shahinul Islam and Amanat Ullah(2013): Experimental Study on Strength Gaining Characteristics of Concrete Using Portland Composite Cement, Korean Society of Civil Engineering (KSCE), Vol.17, No.4, pp.789-796. (Impact Factor = 1.805)
  • Noor Md. Sadiqul Hasan, Habibur Rahman Sobuz, Nafisa Tamannaand Abubakar Sharif Auwalu(2015): Investigation into the Sutability of Kenaf Fiber to Produce Structural Concrete, Advanced Materials Letters, Vol. 6, No. 8, pp. 731-737. 
  • Noor Md. Sadiqul Hasan, Habibur Rahman Sobuz, Nafisa Tamanna, Mohamed Slah Talha and Md. Saiful Islam (2014): Properties of Concrete by using Bagasse Ash and Recycle Aggregate, Concrete Research Letters, An International Journal, Vol. 5, No.2, pp. 768-785.
  • Md. Alhaz Uddin, Jameel Hossain, Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Shahinul Islam and Khan Mahmud Amanat(2012): The Effect of Curing Time on Compressive Strength of Composite Cement Concrete, Applied Mechanics and Materials, Vol. 204-208, pp. 4105 -4109.
  • Habibur Rahman Sobuz, Ehsan Ahmed, Noor Md. Sadiqul Hasan and Md. Saiful Islam (2010): Study on Removal of Brick Clay Salinity in the Manufacture of Conventional Structural Bricks,International Journal of Civil and Structural Engineering, Vol. 1, No. 3, pp. 466-476. 
  • Habibur Rahman Sobuz, Ehsan Ahmed, Noor Md. Sadiqul Hasan and Md. Alhaz Uddin (2011). Evaluation of Externally Bonded CFRP Laminates for the Strengthening of Reinforced Concrete Beams, Journal of Engineering Science,Volume 1 Number 2,Faculty of Civil Engineering, KUET, Bangladesh.

 

Conference Proceedings: 

  • Habibur Rahman Sobuz, Deric John Oehlers, Phillip Visintin, Noor Md. Sadiqul Hasan, Md. Ikramul Hoque and Abu Sayed Mohammad Akid (2016): Flow and Strength Characteristics of Ultra-high Performance Fiber Reinforced Concrete: Influence of Fiber Type and Volume-Fraction, 3rd International Conference on Geotechnical and Structural Engineering (CGSE 2016), 30 - 31 December 2016, Hong Kong. 
  • Noor Md. Sadiqul Hasan, Habibur Rahman Sobuz andGudi John Manak Apac (2011): High Performance Concrete Made with Steel and Polypropylene Fibres Concrete, 5thInternational Conference on Built Environment in Developing Countries (ICBEDC 2011), 6th – 7th December 2011, Penang, Malaysia. 
  • Noor Md. Sadiqul Hasan, Habibur Rahman Sobuz and Md. Shiblee Sayed (2011): A Comparative Study on RC Multi-Storied Building Frames Design between NonSwayand Sway Method Using Staad. Pro V8i Software, International Building and Infrastructure Technology Conference (BITECH 2011), Penang, Malaysia (ISBN 978-967-394-029-5), pp.340-348. 
  • Md. Shiblee Sayed, Noor Md. Sadiqul Hasan and Habibur Rahman Sobuz (2011): To Investigate the Suitability of Coconut Fiber as Aggregates in the Production ofStructural Concrete, 5thInternational Conference on Built Environment in Developing Countries (ICBEDC 2011), 6th – 7th December 2011, Penang, Malaysia. 
  • Habibur Rahman Sobuz, Ehsan Ahmed and Noor Md. Sadiqul Hasan (2011): Effectiveness of CFRP Composites Laminates in Long-term Deformations Performance of RC Beams, 3rd Regional Symposium on Engineering and Technology 2011, 21-23 November 2011, Kuching, Sarawak, Malaysia.
  • Ehsan Ahmed, Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan and Liew Yu Voon(2010):A Comparative Study of Time-Dependent Performance of RC Beams using Oil Palm Shell (OPS) and Normal Weight Aggregates (NWA), 7th International Materials Technology Conference and Exhibition (IMTCE2010), Kuching, Sarawak, Malaysia.
  • Habibur Rahman Sobuz, Md. Saiful Islam, Md. Abdus Salam and Noor Hasan(2010):Clay Bricks Salinity Removal Process in the Production of Conventional Structural Bricks, 7th International Materials Technology Conference and Exhibition (IMTCE2010), Kuching, Sarawak, Malaysia.